SF&E NOW POURING BRASS AND BRONZE ALLOYS

SF&E now pouring Brass and Bronze Alloys

After a ten-year hiatus, Stainless Foundry & Engineering, Inc. is pleased to announce that we are pouring over a dozen brass and bronze alloys for your sand & investment casting needs. Brass alloys, such as Silicon brass (C87500), general-purpose brass (C86500) as well as various other grades are being offered. General bronze alloys, such as C90300 and C90700, are being offered, as well as aluminum enhanced grades (C95500 and C95800) and various other grades to meet our customer specifications!

At SF&E, we are equipped to meet and complete your commercial or high specifications for brass or bronze. Dedicated welding procedures, non-destructive testing, and heat treatment if applicable have been qualified to accept and process your orders. Brass and bronze alloys serve industries such as marine, pump and valve, defense applications, as well as a host of other applications.

Brass and Bronze alloys are metallurgically process controlled by our technical staff of Foundry, Quality, and Metallurgical Engineers, ensuring your castings are delivered to you in compliance to your specifications. Please contact SF&E to find out more about these non-ferrous options offered by Stainless Foundry & Engineering, Inc.

Learn more about Brass and Bronze Castings by Stainless Foundry.

Posted on: 2019-07-24 04:04:05

Other News Articles

Reverse Engineering: SF&E Creates 3D Model from Pattern

3D Modeling has proven results for OEMs, especially when sourcing complex parts. Prior to 3D modeling technology, a full pour was done to determine the integrity of a sand or investment casting. Every time a non-compliant defect was found, the rigging and gating needed to be modified and the process started all over again. This cost the customer and foundry valuable time and money.


Foundry Expert Vijay Talwar Joins Stainless Foundry & Engineering as Director of Metallurgy & Process Engineering

Stainless Foundry & Engineering (SF&E) is pleased to announce the addition of Vijay Talwar as Director of Metallurgy & Process Engineering. Talwar brings with him over 40 years of foundry experience with significant knowledge in process engineering, metallurgy, alloy development, and the markets SF&E does business in.


Oil Refinery Partners with Turbonetics and Stainless Foundry & Engineering on Illium PD Double Suction Casing

Stainless Foundry & Engineering (SF&E) helps its customers solve application challenges by focusing on quality engineering, field testing, and the proper alloy mix for the industry served. Turbonetics Engineering & Services finds trust and reliability in SF&E’s process. Read more about how this partnership has grown to support Turbonetic’s pump needs.


Core Parts: Anatomy of a Centrifugal Pump

Stainless Foundry & Engineering was established more than 75 years ago with a focus on closed impellers for pumps and other parts that were difficult to cast. While we have expanded and developed our scope of expertise and service offerings, pump parts continue to be one of our strengths. In the following, we break down the anatomy of a centrifugal pump – an equipment staple for oil and gas, food and beverage, chemical and other such industries.


For Fristam Pumps, Mutual Trust is Key to 20+ Year SF&E Partnership

When you walk through a grocery store, anything that is contained in a bottle, can, or tube most likely utilized a pump in the production process. From the milk processor removing milk from a tanker truck to the toothpaste manufacturer filling tubes, pumps make it all possible.


Return to the News Page